@article { author = {Rahaei, Alireza}, title = {-}, journal = {Asas Journal}, volume = {22}, number = {59}, pages = {3-4}, year = {2020}, publisher = {Iranian Society of Civil Engineering}, issn = {2008-7721}, eissn = {}, doi = {}, abstract = {}, keywords = {}, title_fa = {جایگاه طرح های عمرانی در پیشرفت کشور}, abstract_fa = {جایگاه طرح های عمرانی در پیشرفت کشور در یک دهه گذشته، اجرای طرح های عمرانی با رکود قابل توجهی روبه رو شده است این رکود باعث توسعه بیکاری در بخش های مطالعاتی و مشاوره از یک طرف و بخش های اجرائی و پیمانکاری از طرف دیگر شده و متأسفانه جمع قابل توجهی از افراد متخصص که سرمایه های انسانی کشور هستند به دلیل عدم امکان فعالیت های داخل کشور، به کشورهای همسایه یا سایر کشورهای غربی مهاجرت نمودند  جدا از این خسران، عدم فعالیت در این بخش عمران، بسیاری از مراکز صنعتی که تولیدات آن ها در طرح های ساختمانی، راه و راه آهن استفاده می باشد نیز دچار کم کاری و رکود شده و به بیکاری دامن زدند. باتوجه به نقش طرح های عمرانی در توسعه رفاه عمومی و پیشرفت اجتماعی فرهنگی تعطیلی این طرح ها در این بخش نیز محدودیت ایجاد نموده و باعث نارضایتی شد. اگر عوامل مرتبط با رکود را بررسی نمائیم، مشاهده می شود که منابع مالی و درآمدی دولت که به طور عمده توسعه صادرات کالاهای مختلف ازجمله نفت است در سال های اخیر متوقف نموده و به عنوان مثال در سال 1399 فروش نفت و مشتقات نفتی نیز درآمد مناسبی برای کشور ایجاد نموده است. امّا بزرگ شدن بدنه دولت که در سال های اخیر تشدید شده است. از یک طرف و هزینه کرد غیرمتعارف در شرکت های دولتی که امکانات عظیمی از کشور را در اختیار دارند باعث شده که سهم بودجه برای طرح های عمرانی به شدت کاهش یافته و این صنعت مهم را با رکود مواجه کرده است. متأسفانه به دلیل عدم نظارت جدی بر عملکرد ارگان ها و شرکت های دولتی، به کارگیری بی رویه نیروی انسانی متوقف نشده و در مقایسه با کشورهای پیشرفته در ایران نسبت به نیروی انسانی به فعالیت های تولیدی چند برابر است. به عنوان مثال اگر شرکت ملی حمل و نقل هوائی مسافر و بار مورد بررسی قرار گیرد با کمتر از 20 هواپیما، تعداد کارکنان موجود 3 تا 4 برابر تعداد مشابه در شرکت های بین المللی است. ارزیابی طرح های ساخت آزادراه، راه های اصلی و راه آهن کشور نشان می دهد که قریب به اتفاق این طرح ها در زمانی بیش از دو برابر زمان پیش بینی شده و هزینه ای حداقل پنجاه درصد بیش از رقم قرارداد اجرا و تکمیل شده اند. تطویل زمان اجرای پروژه ها از یک طرف به دلیل عدم برنامه ریزی و مطالعه جامع و کامل مراحل اول و دوم طرح ها از یک طرف، اعمال تغییرات در حین اجرا و عدم مدیریت مالی مناسب این طرح ها بوده است. متأسفانه عدم تهیه و تصویب طرح های جامع حمل و نقل نیز باعث تصمیم گیری های موضعی و غیر دقیق برای اولویت بندی طرح های راه و راه آهن شده است. باتوجه به وسعت کشور و محدودیت های مربوط به حمل و نقل هوائی، بهترین نوع سیستم حمل و نقل، از نظر ایمنی و هزینه های تمام شده در کشور با حمل و نقل ریلی است. در این ارتباط مسئولین دولتی با منظور کردن سوبسید قابل توجهی در مصرف سوخت برای حمل و نقل زمینی و عدم پشتیبانی مشابه در بخش ریلی امکانات لازم برای توسعه بخش راه آهن را به وجود نیاورده اند این مشکل در داخل کلان شهرها هم به طور مشابه مطرح بوده و در یک دهه اخیر عملاً توسعه راه آهن زیرزمینی در این شهر با رکود قابل توجهی روبه روی شده است. لذا برای حل این مشکلات باید راه حل های مؤثر ازجمله موارد زیر مورد بررسی و توجه قرار گیرند. 1-    تهیه و تصویب طرح های جامع حمل و نقل (شامل بخش های زمینی، ریلی، هوائی و دریائی) 2-    کاهش هزینه های جاری دولت و شرکت های دولتی 3-    اعمال نظارت جدی بر عملکرد شرکت های دولتی توسط مجلس یازدهم 4-    انجام یک طرح جهش تولید در بخش حمل و نقل ریلی برای اجرای سریع طرح های در اولویت 5-    برنامه ریزی برای تسهیل در به کارگیری سرمایه گذاری بخش خصوصی در اجرای طرح های حمل و نقل امید است در شرایط کنونی که در آستانه ورود به قرن جدید هستیم مسئولین دولتی با تجدید نظر اساسی در سیاست های اجرائی و مالی زمینه توسعه طرح های عمرانی که اشتغال گسترده و پیشرفت همه جانبه کشور همراه است را فراهم نمائید.                                                                                               علیرضا رهائی                                                                              جایگاه طرح های عمرانی در پیشرفت کشور  }, keywords_fa = {}, url = {https://www.isceiran.org/article_127898.html}, eprint = {} } @article { author = {zolfagharzadeh, mohammadhossein and Farokhzad, Reza}, title = {Effect of different types of fibers on the static and dynamic viscosity of self-compacting concrete and its interaction on mechanical and Electrical Resistivity}, journal = {Asas Journal}, volume = {22}, number = {59}, pages = {-}, year = {2020}, publisher = {Iranian Society of Civil Engineering}, issn = {2008-7721}, eissn = {}, doi = {}, abstract = {The fiber self-compacting concrete is, in fact, a compound that changes all-new reinforced concrete properties of self-compacting concrete using reinforcing fibers within the concrete. This change shall not be such as to dismiss the rheological behavior of the self-compacting concrete, beyond the standard limits. To investigate these changes, 10 mixing designs were evaluated, one design as control and 9 designs including 0.1, 0.15 and 0.2% steel, glass and polypropylene fibers. The rheological behavior of self-compacting concrete was investigated using a rheometer and traditional tests to determine the properties of fresh concrete such as slump flow test, L box, U box, J loop, V hopper flow time and compressive strength, tensile strength and electrical resistance in hardened concrete and finally, the results were compared with each other. The results show that as the fiber rheological behavior increases, the dynamic and static yield stresses, viscosity of dough and concrete concentration increase and 0.2% of steel fiber has the best performance in tensile strength. In compressive strength with increasing fiber content, these properties decreased and in the case of electrical resistance, self-compacting concrete with 0.2% polypropylene fibers has the best function.}, keywords = {Sself-Compacting Concerete,Fiber,Rheological,MECHANICAL,Electrical resistance}, title_fa = {تاثیر انواع الیاف بر ویسکوزیته استاتیکی و دینامیکی بتن خودتراکم و اثر متقابل آن بر خواص مکانیکی و مقاومت الکتریکی}, abstract_fa = {بتن خودتراکم الیافی در حقیقت ترکیبی است که با بکارگیری الیاف تقویت کننده داخل بتن تمام خواص تازه و سخت شده بتن خودتراکم را تغییر می‌دهد. این تغییر نباید به گونه ای باشد که رفتار رئولوژی بتن خودتراکم را، از حدود استاندارد خارج کند. به منظور بررسی این تغییرات، 10 طرح اختلاط مورد ارزیابی قرار گرفته است، که یک طرح به عنوان شاهد و 9 طرح شامل 0/1، 0/15 و 0/2 درصد الیاف از نوع فولادی، شیشه و پلی پروپیلن می‌باشد. رفتار رئولوژیکی بتن خودتراکم با استفاده از دستگاه رئومتر و آزمایش‌های سنتی تعیین خواص بتن تازه مانند آزمایش جریان اسلامپ، جعبه L، جعبه U، حلقه J، زمان جریان قیف V مورد بررسی قرار گرفت و در بتن سخت شده مقاومت فشاری ، مقاومت کششی و مقاومت الکتریکی بررسی شد و در نهایت نتایج بدست آمده با یکدیگر مقایسه گردید. نتایج نشان می‌دهد که در بحث رفتار رئولوژی هر چه درصد الیاف بیشتر می‌شود تنش های تسلیم دینامیکی و استاتیکی، گرانروی خمیری و تغلیظ بتن افزایش می‌یابد و در مقاومت کششی در 0/2% الیاف فولادی بهترین عملکرد را داشته است، در مقاومت فشاری با افزایش مقدار الیاف، این خواص کاهش پیدا می‌کند و در مورد مقاومت الکتریکی، بتن خودتراکم دارای 0/2% الیاف پلی‌پروپیلن بهترین عملکرد را دارد.}, keywords_fa = {بتن خودتراکم,الیاف‌,رئولوژی,مکانیکی,مقاومت الکتریکی}, url = {https://www.isceiran.org/article_119882.html}, eprint = {} } @article { author = {Shahsavani, Sajad and Vakili, Amir Hossein and Mokhberi, Mehdi}, title = {Experimental investigation on the effects of nanosilica and polypropylene fiber on the geotechnical characteristics of the expansive soils under freeze-thaw cycles}, journal = {Asas Journal}, volume = {22}, number = {59}, pages = {-}, year = {2020}, publisher = {Iranian Society of Civil Engineering}, issn = {2008-7721}, eissn = {}, doi = {}, abstract = {Expansive soils are one of the problematic soils that are spread in many countries including Iran. The swelling potential of the untreated expansive clay sample was extremely high, thus the soil sample provided for the study was considered in the very high expansion category. Nanosilica and polypropylene fibers were used as the stabilizing and reinforcing materials. The results indicated that the swelling potential of one-day cured samples by the addition of nanosilica decreased moderately, and the improvement by means of nanosilica and polypropylene fiber decreased the swelling potential significantly. It was observed that the increase of curing time led to a decrease in swelling potential and an increase in UCS. To investigate the durability of the soil samples, the effects of freeze-thaw cycles on the volume changes and strength reduction rate of treated and untreated samples were measured. The highest strength reduction rate occurred after the 1st and 2nd cycle such that it was much lower for the treated samples by the optimal content of additives compared with the untreated one. In addition, the maximum volumetric strain for the untreated expansive clay was measured two times higher than that of the sample treated by nanosilica and polypropylene fiber simultaneously. The results of microstructural tests confirmed the strong potential use of a combination of nanosilica and polypropylene fiber in reducing the negative effects of freeze-thaw cycles on the soil characteristics.}, keywords = {expansive soil,swelling potential,Freeze-thaw cycle,nanosilica,Polypropylene fiber}, title_fa = {ارزیابی آزمایشگاهی تأثیر افزودنی های نانوسیلیس و الیاف پلی پروپیلن بر خصوصیات خاکهای متورم شونده تحت سیکل های ذوب و یخ}, abstract_fa = {خاک های متورم شونده، خاکهای مسئله داری هستند که به طور وسیعی در سرتاسر جهان از جمله ایران پراکنده شده اند. در این تحقیق تاثیر جداگانه و همزمان نانوسیلیس و الیاف پلی پروپیلن در زمان های عمل آوری مختلف برخصوصیات تورمی، تغییر حجم و مقاومت فشاری محصور نشده نوعی خاک با تورم پذیری بالا تحت تاثیر سیکلهای ذوب و یخ متوالی مورد ارزیابی آزمایشگاهی قرار گرفت. خاک اولیه با پتانسیل تورم بالا در رده خاکهای با تورم پذیری بسیار زیاد قرار گرفت. نتایج نشان دادند که افزودن نانوسیلیس موجب کاهش تورم و افزودن الیاف پلی پروپیلن به نمونه بهسازی شده با نانوسیلیس موجب کاهش دوباره تورم در زمان عمل آوری یک روزه گردید. همچنین افزایش زمان عمل آوری موجب کاهش تورم و افزایش مقاومت در نمونه های بهسازی شده شد. مطابق نتایج، سیکلهای ذوب و یخ موجب کاهش مقاومت گردید، بطوریکه بیشترین کاهش مقاومت در سیکلهای اول و دوم اتفاق افتاد که این میزان کاهش در خاک بهسازی شده کمتر از نمونه اولیه مشاهده گردید. همچنین سیکلهای ذوب ویخ موجب افزایش تغییر حجم نمونه ها گردید بطوریکه بیشترین تغییر حجم برای خاک اولیه اندازه گیری شد و این مقدار در نمونه بهینه بهسازی شده به حدود نصف کاهش پیدا کرد. نتایح آنالیزهای ریزساختاری نشان دادند که ترکیب نانوسیلیس و الیاف پلی پروپیلن می تواند تأثیرات منفی ناشی از سیکلهای ذوب و یخ بر روی تغییرات حجم و کاهش مقاومت نمونه خاک مورد مطالعه را به نحو مناسبی کاهش دهند.}, keywords_fa = {خاک متورم شونده,پتانسیل تورم,سیکل ذوب و یخ,نانوسیلیس,الیاف پلی پروپیلن}, url = {https://www.isceiran.org/article_119883.html}, eprint = {} } @article { author = {ghiasi, vahed and Heydari, Farzad and Behzadineghad, Hossain}, title = {Evaluation of Settlement of Lurestan Rudbar earth and Rockfill Dam using Monitoring results and back analysis}, journal = {Asas Journal}, volume = {22}, number = {59}, pages = {-}, year = {2020}, publisher = {Iranian Society of Civil Engineering}, issn = {2008-7721}, eissn = {}, doi = {}, abstract = {Evaluation of Settlement for earth and rockfill dams during the construction, the end of the construction phase as well as the first impounding period as one of the most critical times during the life of the dam are always significant for geologists, geotechnical engineers and dam designers. Based on this purpose, in this research paper, the behavior of Rudbar lorestan earth rockfill dam using the results of monitoring and back analysis using FLAC 2D software (FDM) has been considered. In order to evaluate the accuracy of amount of dam's geotechnical design parameters considered in the dam construction process, the numerical modelling and prediction the amount of dam's geotechnical design parameters of actual soil condition of the dam construction, which is named back analyses or back calculation was carried out. The results from monitoring are input parameters for the numerical modeling. Mohr-Coulomb Elastoplastic behavior was the suitable numerical modeling of Rudbar dam which is according to the results of the analysis and the data obtained from instrumentation readings. In this research, there was a good agreement between the results of numerical model and monitoring results in addition, the obtained values from back analyses of numerical models was with confidence.}, keywords = {Rudbar earth rockfill dam,monitoring,Settlement,Back Analysis,FLAC 2D}, title_fa = {بررسی نشست بدنه سد خاکی سنگریزه ای رودبار لرستان با استفاده نتایج ابزاردقیق و روش تحلیل برگشتی}, abstract_fa = {بررسی نشست سدهای خاکی و سنگریزه ای در دوران ساخت، پایان ساخت و همچنین اولین دوره آبگیری به عنوان یکی از بحرانی ترین زمان ها در طول عمر سد، همواره قابل توجه زمین شناسان ، مهندسان ژئوتکنیک و طراحان سد بوده است. به همین منظور در این تحقیق رفتار سد خاکی-سنگریزه ای رودبار لرستان با استفاده از نتایج رفتارسنجی و تحلیل برگشتی به کمک نرم افزار تفاضل محدود FLAC 2D مورد مطالعه قرار گرفته است. در این تحقیق به منظور تدقیق پارامترهای در نظر گرفته شده در مراحل طراحی سد و ساخت مدل عددی منطبق بر شرایط واقعی احداث سد، مدل سازی های عددی انجام شده و نیز با استفاده از نتایج رفتارسنجی، تحلیل برگشتی انجام شده است. در مدل سازی عددی، مدل رفتاری مصالح به کار رفته در ساخت هسته سد، مدل رفتاری الاستوپلاستیک موهر- کولمب انتخاب شد که با توجه به نتایج تحلیل های صورت گرفته و داده های به دست آمده از قرائت های ابزاردقیق، مدل مناسبی برای سد رودبار لرستان می باشد. در این تحقیق مقایسه نتایج بدست آمده از مدل سازی عددی با مقادیر اندازه گیری شده توسط ابزاردقیق نصب شده، انطباق و هم خوانی مناسبی ملاحظه شد.}, keywords_fa = {سد خاکی سنگریزه ای رودبار,نشست,رفتارسنجی,تحلیل برگشتی,FLAC 2D}, url = {https://www.isceiran.org/article_125251.html}, eprint = {} } @article { author = {Valipour, Alireza and Jamali, MEHDI}, title = {Identification of effective criteria for the selection of contractors in the South Zagros Oil and Gas Company}, journal = {Asas Journal}, volume = {22}, number = {59}, pages = {-}, year = {2020}, publisher = {Iranian Society of Civil Engineering}, issn = {2008-7721}, eissn = {}, doi = {}, abstract = {Outsourcing is one of methods Assignment construction project in the oil and gas industry of the country. Failure to select of contractors is one of the factors responsible for failure of projects time and cost and quality expectations is considered the employer. Contractors are evaluated using the default criteria. Due to the complexity of the oil and gas projects, it is necessary to identify and evaluate the contractor selection criteria according to the nature of these projects. The aim of this paper is to identify the criteria that influence the selection of construction contractors at Zagros Oil and Gas Company. For this purpose, the data were collected through library research, documentation and effectiveness criteria of the current legislation and interviews with experts selected construction Contractor Company in South Zagros Oil and Gas was detected. Then, weighting of the criteria was done by using information collected through questionnaire and SWARA method. The results showed that the criteria for similar projects, the executive team, the skill of the effective staff, the suggested price and bank credit, were ranked first to fifth. It is hoped that the results of this research will be used in the selection of contractors in the South Zagros Company by using new multi-criteria decision making methods.}, keywords = {Outsourcing,Construction projects,Contractors Evaluation,South Zagros,SWARA}, title_fa = {شناسایی معیارهای مؤثر در انتخاب پیمانکاران عمرانی در شرکت نفت و گاز زاگرس جنوبی}, abstract_fa = {برون‌سپاری از روش‌های انجام پروژه‌های عمرانی در صنعت نفت و گاز کشور به شمار می‌رود. عدم انتخاب صحیح پیمانکاران یکی از عوامل عدم موفقیت پروژه‌ها دررسیدن به زمان و هزینه پیش‌بینی‌شده و کیفیت مدنظر کارفرما است. ارزیابی پیمانکاران با استفاده از معیارهای پیش‌فرض صورت می‌گیرد، با توجه به پیچیدگی‌های پروژه‌های نفت و گاز ضروری است معیارهای انتخاب پیمانکاران با توجه به ماهیت این نوع پروژه‌ها شناسایی و ارزیابی گردند. هدف این مقاله شناسایی معیارهای تأثیرگذار در انتخاب پیمانکاران عمرانی اصلح در شرکت نفت و گاز زاگرس جنوبی است. بدین منظور ابتدا با جمع‌آوری اطلاعات از طریق مطالعات کتابخانه‌ای، اسناد و قوانین فعلی و مصاحبه با خبرگان معیارهای مؤثر در انتخاب پیمانکاران عمرانی شرکت نفت و گاز زاگرس جنوبی شناسایی گردید. سپس با استفاده از اطلاعات جمع‌آوری‌شده از طریق پرسش‌نامه و روش سوارا وزن دهی معیارها انجام گرفت. نتایج نشان داد، معیارهای انجام پروژه‌های مشابه با وزن 5/0، تیم اجرایی با وزن 25/0، سابقه کاری کارکنان کلیدی12/0، قیمت پیشنهادی06/0 و اعتبار بانکی03/0 رتبه‌های اول تا پنجم را به خود اختصاص دادند. نتایج این تحقیق می‌تواند در انتخاب صحیح پیمانکاران عمرانی در شرکت زاگرس جنوبی کمک شایانی نماید.}, keywords_fa = {برون‌سپاری,پروژه‌های عمرانی,ارزیابی پیمانکاران,زاگرس جنوبی,سوارا}, url = {https://www.isceiran.org/article_125975.html}, eprint = {} } @article { author = {Naderi, Mahmood and Kaboudan, Alireza}, title = {Regression Analysis of Concrete Permeability Containing Different Kinds of Aggregates and Cement Pastes}, journal = {Asas Journal}, volume = {22}, number = {59}, pages = {-}, year = {2020}, publisher = {Iranian Society of Civil Engineering}, issn = {2008-7721}, eissn = {}, doi = {}, abstract = {Investigating the effect of cement paste and aggregate on concrete permeability is of great importance. So, in this paper, the results of the permeability of 28-day concrete specimens containing granite, andesite, siliceous, limestone, marble and tuff aggregates and cement pastes without / with silica fume, fly ash, zeolite and limestone powder admixtures are presented. In this investigations, concrete permeability is measured using “Cylindrical chamber” method and surface strength of rocks and cement pastes is measured using “Twist-off” method. The obtained results show a linear correlation between the compressive and surface strength of rocks and cement pastes with coefficient of determinations higher than 0.9. Regarding the permeability, it was observed that the concrete containing granite aggregates and silica fume has the highest permeability and the concrete containing tuff aggregates and type 2 Portland cement has the lowest permeability. A regression analysis for estimating the penetrated water volume into the concrete specimens, regarding compressive and surface strength of the rocks and cement pastes, water absorption and saturated surface dry density of the rocks is also presented. Penetrated water volume into the concrete specimens can be estimated using the regression model.}, keywords = {regression analysis,Concrete permeability,Cylindrical chamber,Twist-off,Aggregate and cement paste}, title_fa = {تحلیل رگرسیونی نفوذپذیری بتن با انواع سنگدانه‎ها و خمیر‎های سیمان}, abstract_fa = {بررسی تأثیر خمیر سیمانی و سنگدانه‎ها بر نفوذپذیری بتن از اهمیت ویژه‎ای برخوردار است. از این رو در این مقاله، نتایج نفوذپذیری نمونه‎های بتنی 28 روزه دارای سنگدانه‎های گرانیت، اندزیت، سیلیس، آهک، مرمر و توف و خمیر‎های سیمانی مختلف بدون/ با افزودنی دوده سیلیسی، خاکستر بادی، زئولیت و پودر سنگ آهک ارائه شده است. در این بررسی‎ها، نفوذپذیری بتن با بکارگیری روش "محفظه استوانه‎ای" و مقاومت سطحی سنگهای صخره و خمیر‎های سیمانی با روش "پیچش" اندازه‎گیری شده‎اند. نتایج به دست آمده یک رابطه خطی با ضرایب تعیین بزرگ‎تر از 9/0 بین مقاومت‎های فشاری و سطحی سنگهای صخره و خمیر‎های سیمان را نشان می‌‎دهند. در ارتباط با نفوذپذیری، مشاهده شد که بتن دارای سنگدانه‎های گرانیت و دوده سیلیسی، کمترین و بتن دارای سنگدانه‎های توف و بدون افزودنی، بیشترین نفوذپذیری را داشته‎اند. تحلیل رگرسیونی تخمین حجم آب نفوذی به نمونه‎های بتنی با مد نظر قرار دادن مقاومت‎های فشاری و پیچشی سنگ‎های صخره و خمیر‎های سیمانی، جذب آب و چگالی اشباع با سطح خشک سنگهای صخره نیز ارائه شده است. با استفاده از مدل رگرسیونی به دست آمده، می‎توان حجم آب نفوذی به درون نمونه‎های بتنی را پیش‎بینی کرد.}, keywords_fa = {تحلیل رگرسیونی,نفوذپذیری بتن,محفظه استوانه&lrm؛ ای,پیچش,سنگدانه و خمیر&lrm؛ سیمان}, url = {https://www.isceiran.org/article_126881.html}, eprint = {} } @article { author = {ghahramani, ali and Khazaei, Jahangir}, title = {Study of the effect corner angle on deformations and failure surfaces of soil nailed wall}, journal = {Asas Journal}, volume = {22}, number = {59}, pages = {-}, year = {2020}, publisher = {Iranian Society of Civil Engineering}, issn = {2008-7721}, eissn = {}, doi = {}, abstract = {In this research, the effect of the corner angles on the stability, deformation of concave and convex excavations under service loading is evaluated. Generally, the excavation wall analysis is studied by assuming a plain strain, and two-dimensional, While the stability of the excavation corners and the effects of geometry are among the important issues affecting the stability and control of wall deformation and failure surfaces, it can only be examined in a three-dimensional analysis. In this research numerical modeling was performed using ABAQUS software in sandy soil domain. The results indicate that the damping effects of concave corner. The lower corner angle is less, the damping effects on settlements surface and horizontal displacement of the excavation wall is higher. But with lower angles, the rate changes. The best angle that has an optimal damping effect is the angle of 90 degrees. The convex corners cause instability and increase surface settlement and horizontal displacement changes. The use of high stiff nails limits surface settlements and horizontal deformation and causes a change in the shape and location of the failure surface.}, keywords = {Surface Settlement,Excavation,Failure Surfaces,Corner effect,three-dimensional}, title_fa = {مطالعه تاثیر زاویه گوشه بر تغییرشکل ها و سطوح گسیختگی دیوار میخ‌گذاری شده‌ی گود}, abstract_fa = {در این تحقیق تاثیر زاویه گوشه گود بر پایداری، تغییرشکل گودهای مقعر و محدب و محل سطوح گسیختگی بحرانی تحت بارگذاری سرویس ارزیابی می‌شود. عموما تحلیل دیواره‌ی گود با فرض کرنش مسطح و به‌صورت دوبعدی مطالعه می شود، حال آن‌که پایداری گوشه‌های گود و اثرات هندسه گود از جمله موضوعات مهم و تاثیرگذار بر پایداری و کنترل تغییرشکل‌های دیوار و سطوح گسیختگی است که صرفاّ در تحلیل سه‌بعدی قابل بررسی است. در این تحقیق مدل‌سازی عددی با استفاده از نرم‌ا‌فزار ABAQUS در محیط خاک ماسه ای انجام شده است. نتایج حاکی از تاثیر بازدارندگی گوشه‌های گود مقعر است. هرچه زاویه گوشه گود کمتر باشد، تاثیر بازدارندگی در نشست‌های سطحی و تغییرمکان افقی دیواره‌ی گود بیشتر است. لکن با کم شدن بیشتر زاویه گوشه این نرخ تغییرات کمتر می شود. بهترین زاویه که تاثیر بازدارندگی بهینه را دارد زاویه 90 درجه می‌باشد. گوشه محدب باعث ناپایداری گود و افزایش تغییرمکان و نشست‌ها می شود. استفاده از میخ‌هایی با سختی زیاد، نشست سطحی و تغییرشکل افقی را محدود کرده و باعث تغییر در شکل و محل سطح گسیختگی می شود.}, keywords_fa = {نشست سطحی,گودبرداری,سطوح گسیختگی,اثر گوشه,سه بعدی}, url = {https://www.isceiran.org/article_126882.html}, eprint = {} }